1-10 Scale Fuel Jug 3D print model

License: Royalty Free

author:

landonl97

All content related to this 3D asset—including renders, descriptions, and metadata — is credited to its original author, «landonl97». CGhub does not claim copyright ownership over the content used.

This is a 1/10 scale fuel jug, based off a VP Racing style jug I found online. Use a 3mm ID 5mm OD silicone tube cut to 30-40mm for the tube or use one of the STL files for a rigid version. I used adaptive layer heights in cura, otherwise I would recommend 0.1mm for best detail.

Printing/Post Processing Notes: The jug and jug cap should be made of the same material to ensure fitment but the material doesn't matter. The tube cap should be printed in PETG and heated to bend into place or bent into place right after the print is done so it is still warm and flexible. No supports needed but I printed the tube cap on a raft.