3d printing Tire Rims Wheel set for miniatures cars 3D print model

License: Royalty Free

author:

itman3d

All content related to this 3D asset—including renders, descriptions, and metadata — is credited to its original author, «itman3d». CGhub does not claim copyright ownership over the content used.

For RC enthusiast and Diecast enthusiast.Large scales can use FDM or Resin printing. Small scale - resin.

Specs:
•1:16 •1:24 •1:25 •1:64

The model is combined, all the main parts are presented as separate parts, so they are easily modified or removed.
The *.stl files are in the *.zip archive. -Rims (21 mm 19 inches in 1/24 scale)-Tire (31 mm 30 inches in 1/24 scale)-Width tires for scale 24: •10mm •11mm •13mm

*The 3D model may differ from the original in the dimensions and appearance of some parts, since information about the dimensions and appearance is taken from open sources. And often the information is different in different sources. The author reserves the right to take what dimensions as the basis for creating a 3D model.

**Attention:-For experienced model builder-Parts could need some adjustments with files or sand paper-Take care when you remove the supports-Parts should be glued.-Not recommended for kids-Be careful with the alignment of pieces when gluing.-Could need some sanding/ adjustments/ cuts / scratch built parts to fit your chassis / model kit / Wheels-Check dimmensions of your model before printing

Please do not Redistribute or sell this STL file online