Can be used to convert 1/43 diecast to slot car, to improve performance of standard 1/43 or 1/32 commercial cars (like Carrera, SCX, Artin...) or in scratch build projects. Guide blade instead of pin for better corner handling and more drifting angle (you can use standard Scalextric or other brands). Adjustable front axle height with grub screws to allow fine tuning of the car rolling attitude in corners. Designed for proper slotcar tyres and rims on 2.38mm shaft (allows you to choose from a variety of standard slot car wheels* or use the ones I have for sale). Designed for the All Slot Car Crown Gear 22t (sold by Pendle Slot Racing under code AS005) and 9t pinion gear. Easy to remove parts: the chassis support is glued to the inside faces of the car body and the other part is attached with 2x12 screws. No force needed to install the motor: smooth installation. On diecast bodies, the paint on the inside where the glue is applied needs to be removed (sand paper will do the job. Epoxy glue works very well, like Araldite or Gorilla. Wheelbase adjustment: min 49mm, no max. Use 2.38mm (3/32”) rods, same diameter as the shafts. Width adjustment: min 26mm, max 33mm (more width can be achieved gluing a layer of balsa wood to the adjustable supports if necessary). For cars heavier than 90 grams, please use the other chassis I also have here in CGTrader.
Videos of the conversions in my Youtube channel: (133) Everson Possamai - YouTube
*I also have the wheels and driver for sale on CGTrader. Other options of wheels and tires are available for sale on the Pendleslotracing webshop (I have no commercial or personal connection with them). I like to use these as they fit the car scale perfectly: PCS-3210155, SIW14308015P.
Assembly instructions: see videoin my Youtube channel and above.
