AINI SPOILERS Marco AI Ball AI Nirvana Initiative Figure 3D print model

License: Editorial No Ai

author:

probablyrobin

All content related to this 3D asset—including renders, descriptions, and metadata — is credited to its original author, «probablyrobin». CGhub does not claim copyright ownership over the content used.

AI-Ball figure of Marco from AINI. Includes Pleading and Normal variations, alongside an older Normal variation that doesn't actually match Marco's model, but I figured I'd add it in anyway.

Personal Recommended Cura Settings:

Walls:

Wall Thickness: 1.6mm

Infill:

Infill Density: 10%
Infill Pattern: Lines

Support:

Support Placement: Everywhere
Support Overhang Angle: 60-65 degrees
Support Density: 15-20%
Enable Support Interface
Enable Support Roof
Enable Support Floor
Use Towers

Build Plate Adhesion: Raft

Angle: It is recommended to print these files at an angle where minimum support is required, while being enough to prevent the print from failing. I tend to print Marco at a slight angle, with zir head on the build plate (like ALMOST upside down, but not completely). This makes it easier to remove the support underneath zir arms without breaking them.