The TT01, which has been lying around at home for a long time or was purchased for its beautiful body but neglected due to its ambiguous performance, is being reborn.Everything(including main chassis) needed for high qulity RWD conversion has been modified.Stage-1 is center motor version.Can set up Ackerman and parallel steering using two types of servo horns.Because reality is important in RC Drift, the installation of interior parts was applied from the early design stage.The design of the interior parts has been completed. It will be uploaded separately later.
Necessary parts
M5 washer-1pc
M3 nut-67pcs
M3 nylon nut-1pc
M3 5mm set screw-4pcs
M3 countersunk bolt8mm-12pc, 10mm-26pcs, 12mm-2pcs, 15mm-4pcs, 16mm-4pcs, 20mm-4pcs, 25mm-2pcs, 32mm-2pcs, 35mm-2pcs,
M3 wrench bolt8mm-4pcs,12mm-2pcs,15mm-6pcs,16mm-6pcs,18mm-11pcs, 30mm-4pcs
M2countersunk bolt-for split chassis4mm-12pcs, 10mm-4pcs
M2 nut(너트)-12pcs-for split chassis
dia 15mm, thickness 3mm magnet-4pcshttps://www.aliexpress.com/item/1005004276902194.html?spm=a2g0o.order_list.order_list_main.28.171c1802Yf76KU
3mm shaft-cut to use40mm-8pchttps://www.aliexpress.com/item/1005005477259278.html?spm=a2g0o.productlist.main.3.519917ecLC8Vtn&algo_pvid=866457d2-ffe3-4bf0-949f-7befe50e21c6&aem_p4p_detail=202311191020141880971777455260001596605&algo_exp_id=866457d2-ffe3-4bf0-949f-7befe50e21c6-1&pdp_npi=4%40dis%21USD%211.95%211.31%21%21%2114.03%21%21%402103244417004180136834017e981d%2112000033239843707%21sea%21KR%21186590808%21&curPageLogUid=T4q7MN43deYg&search_p4p_id=202311191020141880971777455260001596605_2
4.8mm joint ballend & cap- 8set
Necessary tools
M2, M3 Hex wrenchDrill - 2.0, 2.7, 3.0, 3.1, 4.0mmM3 tapping toolPlus driverFile, knife, saw....etc.
Necessary RC partsTransmitter, receiverLi-po(2s 3000~5000mah)batteryGyro
