ARTAIR LONG ARM STAND CLIPON-SLIDE MARK4 10 INCH 3D print model

Description

3D MODEL DESCRIPTION

This is easy to install Geprc Mark4 V2 10 inch 7.5mm Long Arm Stand clip onl and slide, no bolts required, you can install and uninstall this protector without a need to unscrew the motors.

Installation on clip is firm and will allow to keep the motors in place without screws loosing over time, which is inevitable if you put plastic between screw and carbon plate.

Removable legs are designed for two reasons:1) To take off from high grass or other not comfortable surfaces2) To optimise transportation of the drone.

3D PRINTING SETTINGS

Standard print settings

Pay attention to 3mf file, Base are placed specificaly at 45 angle, which ensures rigidity of the structure and optimal print quality.

Infill 15%- optimal

Tree auto support works eleganlty good (see pictures).

Copet\PETG is preferable.

ClipON the base and secure with zip tie on the other end ( which also secures your motor cables in place)

Slide to Clip the Leg

Ready to GO.