Autonomus - Hydrogen Fuel Cell Concept Car 3D print model

License: Editorial No Ai

author:

lyahovsky

All content related to this 3D asset—including renders, descriptions, and metadata — is credited to its original author, «lyahovsky». CGhub does not claim copyright ownership over the content used.

Easy-to-print car model kit in scale 1:43 for self assemblyFDM 3D-printable with standard settings

Attention! Steel axles with a diameter of 1 mm need to be ordered separately!

Print settings:Print settings depends on your printer.For this model TPU plastic was used for tires and PLA for all other parts

Recommended 0.4 mm nozzle 0.2 mm layer height

Assembly notes:

Remove supports accurately
Drill all holes with 1 mm hand drill
Use 1.2 mm drill for axle holes in car body
Cut the axles in this length: 4x15 mm (side doors); 3x39 mm (roof doors); 2x38 mm (wheels); 2x5mm (front door)
Assembly all doors and parts together. Don't bend the axles!
Glue the windows and tank door on the car body