Babys Bottle Magnet 3D print model

License: Content published with the label may not be sold, given, or assigned to another person or entity in the form it is downloaded from the site.

author:

3dhoome

All content related to this 3D asset—including renders, descriptions, and metadata — is credited to its original author, «3dhoome». CGhub does not claim copyright ownership over the content used.

A cute refrigerator magnet where you can place photos of your babies.

Using the photo cutting template provided with the model file, center the area you want to display and trace the outer frame of the template with a pen.
Then, cut the photo with scissors and insert it into the channel on the back of the object.
There is a 20mm diameter and 2mm deep magnet slot on the back of the object. Glue your magnet into this slot. (I recommend using liquid silicone. It ensures no separation.)
Now, you can place your baby’s bottle wherever you like.

**Suggested Printing Parameters:

For Resin Printers:**Default parameters should be enough

For Filament Printers:

Nozzle: 0.4 mm Layer Height: 0.12mm Wall Number: 3Bottom Layers: 4Top Surface Layer: 4Top Surface: MonotonicInfill: 15% GyroidRetract at Layer ChangeDO NOT use support !

Dimensions: 40x20x90 mm (1.6x0.8x3.5”)