BBS RS wheels set for RC drifting wltoys miniz - multi offset 3D print model

License: Royalty Free

author:

89dsgn

All content related to this 3D asset—including renders, descriptions, and metadata — is credited to its original author, «89dsgn». CGhub does not claim copyright ownership over the content used.

A set of most classic wheels - BBS RS front and rear wheels with tires.The front rim diameter is 9x19,5mm, rear 11x19,5mm, the tire diameter is 8x26mm and 10x26mmThey have a 3x2mm mounting hole, they are available in four versions with an offset of 0, -1, -2, -3 millimeters.

The wheels are designed for mini-z and wltoys 1/28 drift cars.Tested on a modified Wltoys K989 RWD.

If you want to sell physical copies of my designs in your store or on your website, please contact me.Check out my profile for other models.

Designed to be printed from resin.Test models was printed on Anycubic Photon Mono at 0.05mm layer height, with good results.