Experience the most deadly RPG encounter of all time in full 3d plastic glory on your tabletop:
The Bridge
Carefully cross a raging river, enter into a forbidden kingdom, or duel to the death on this versatile viaduct.
This completely modular 7 piece bridge set is simple to print, tested, and customizable (see images)
- Conservative sized pieces are designed for compatibility with smaller resin printers
- Print a variety of parts and adapt the bridge to any length you need
- Robust connections, when handled with care, provide easy assembly/disassembly
A 2 part stair/ramp includes small bumpers to hold minifigs in place on the incline
Universal footings interlock into the column archways, aligning to a 1" grid
Connection pieces provide a cost effective way of adding length without extensive printing. Choose from Short, Long, or Broken connections
1" spaces are clearly marked, and assembly seams align with natural stone mortar joints
Included: 7 STL files and 7 pre-supported Chitubox files
No need to mirror any files - all pieces are design to interlock as modeled
Printing Tips:
- Be gentle when assembling. Ensure the parts are aligned and work them together/ apart slowly
- With all 3d printers and resins, tolerances can vary with assembled models
- Chitubox files with supports are provided for convenience, but may not be suitable for every 3d printer. Files are over-supported to lower chance of failure
- After printing, carefully test interlocking connections
- Connection too tight? Lightly sandpaper a few sides, assemble the parts, then spray primer to avoid adding thickness to masked connections
- Connection too loose? Add 1 or 2 coats of primer to thicken up the joints
Print photos created from an Anycubic Photon, .025mm layer height
Enjoy!
STL (Stereolithography, filesize: 368 MB)
