C20xe Powercap 71 mm no fitting RIGHT PIPE 3D print model

$15

License: Royalty Free

author:

PrintedPower

All content related to this 3D asset—including renders, descriptions, and metadata — is credited to its original author, «PrintedPower». CGhub does not claim copyright ownership over the content used.

This is POWERCAP for the standard Opel / Vauxhall C20XE Inlet Manifold. Adding this part will result in more sensitive throttle and increased power. Inlet pipe diameter is 71 mm, no fitting for idle valve. The inlet pipe goes at an angle of 5 degrees to the transverse axis of the car. Recommended ABS (or Nylon-Carbon) printing, mechanical and chemical post-processing.

Print Settings Rafts: Yes Supports: Yes Resolution: 0.4mm Infill: 100%

I recommend after printing to align the irregularities of the plane under the throttle gasket. Use 240 grit sandpaper, then 500 or 1600 grit on glass and with added water.

Feel free to write to me if you need additional variants of shape or part size for your particular variant. I will gladly complete the additional options.

Works great with this gasket https://www.cgtrader.com/3d-print-models/hobby-diy/mechanical-parts/opel-c20xe-throttle-gasket

3D Model details

cgtrader Platform
Animated
Rigged
Ready for 3D Printing
VR / AR / Low-poly
PBR
Textures
Materials
UV Mapping
Polygons: 0
Vertices: 0
Geometry: Manifold geometry | No N-gons |

Tags

Opel Powercap C20xe C20let Pipe Inlet Z20let Calibra Astra Gsi Vauxhall Intake Engine Idle Valve Auto Car Germany Hobby Diy Hobby diy Mechanical Parts Mechanical parts

Similar models