C20xe Powercap RIGHT PIPE 80 mm NO fitting 3D print model

$15

License: Content published with the label may not be sold, given, or assigned to another person or entity in the form it is downloaded from the site.

author:

PrintedPower

All content related to this 3D asset—including renders, descriptions, and metadata — is credited to its original author, «PrintedPower». CGhub does not claim copyright ownership over the content used.

This is POWERCAP for the standard Opel / Vauxhall C20XE Inlet Manifold. Adding this part will result in more sensitive throttle and increased power. Inlet pipe diameter is 80 mm. Recommended ABS (or Nylon-Carbon) printing, mechanical and chemical post-processing.

Warning! Inlet pipe only on the right side! Not the standard direction of an inlet branch pipe. This part has been successfully used on a car prepared for road racing with a c20xe engine for more than two years.

I recommend after printing to align the irregularities of the plane under the throttle gasket. Use 240 grit sandpaper, then 500 or 1600 grit on glass and with added water.

Feel free to write to me if you need additional variants of shape or part size for your particular variant. I will gladly complete the additional options.

Works great with this gasket https://www.cgtrader.com/3d-print-models/hobby-diy/mechanical-parts/opel-c20xe-throttle-gasket

3D Model details

cgtrader Platform
Animated
Rigged
Ready for 3D Printing
VR / AR / Low-poly
PBR
Textures
Materials
UV Mapping
Unwrapped UVs: Unknown
Geometry: Unknown
Polygons: 0
Vertices: 0

Tags

Car Power Vehicle Sport Technology Opel C20xe Powercap Engine Flow Vauxhall Z20let Gsi C20let Air Calibra Inlet Pipe Corsa Turbo Hobby Diy Hobby diy Mechanical Parts Mechanical parts Sport car Car engine Car parts Engine parts

Similar models