*Please note the Kei Flatbed in the pictures is sold separately.Body mounts are NOT included for the Kei Cab, as the cab directly mounts onto the flatbed. Please purchase the Crawler Kei Flatbed separately to use body mounts for the flatbed. *
Aftermarket shock towers may be required. All inner fenders need to be removed before installing.
Introducing the Crawler Kei Cab, inspired by the charming Kei trucks of the last century! These trucks provided a unique blend of functionality and fun, while it may not be the most capable truck for offroading, its narrow width is perfect for navigating tight trails and ticky terrains.
Kei Cab and Kei Flatbed combo will only work for low profile transmissions. Please see Crawler Kei Flatbed for more info!
The Kei Cab is currently our simplest build in the range, using the least amount of hardware for easy assembly—perfect for newcomers eager to try our kits for the first time!
Modestly sized, it measures just 197mm tall, 194mm wide (excluding the mirrors), and 176mm long, making it both practical and charming for any adventure.
The Kei Cab was designed to be used with a 1/10 crawler with 220mm outermost tyre to tyre width and with a maximum tyre height of 100mm, which pairs best with 1.55 or 1.7in beadlock wheels. The Kei Cab is also meant to be used with the Kei flatbed to carry payloads and to complete the look.
Some of the features and details included:Functional door hingesMagnet latched doorsDashboard and steering wheelMirrors can pivotWipersFunctional headlight and blinker light bucketsBumper integrated onto cab for easier compatibilitySplit cab and roof for easy printing
Be sure to check out the instruction manual and gather all required hardware for assembly.
It is highly recommended to read the instruction manual before purchasing, to ensure you have all the required tools and hardware to assemble this body.
Assembly instructions:View the link below to download the assembly instructionshttps://www.aheadrc.com/manual
Should you need any help, please do not hesitate to contact us!
FDM printing:PLA+ filament0.2mm-0.4mm layer heights20-30% infill densitySupports are necessary
STL (Stereolithography, filesize: 14.9 MB), PDF (PDF, filesize: 14.9 MB)
