Printer minimum build volume required - 256*256*95mm (Bambu Labs X1 size)
M939 cab is sold separately. This listing is for the flatbed only.
Aftermarket shock towers are NOT required. Please remove all inner fenders before installing. Dig and 2 speed servos will also need to be removed.
The M939 was a beast of a truck offroad, no doubt about that. But on tighter and more technical trails it would usually benefit from a slightly shorter wheelbase for better maneuverability, and that's where we decided to develop a 4x4 version of the M939 for the SCX10 iii Gladiator chassis. (Cab sold separately)
The flatbed is designed specifically for the SCX10 iii Gladiator’s stock wheelbase of 353mm, tyre to tyre width of 240mm, and paired with 120mm diameter tyres for the best balance between scale aesthetics and crawling performance.
Body mounts are included only for the SCX10 iii Gladiator chassis. This flatbed will not work with the standard 313mm wheelbase SCX10 iii chassis, or any other 313mm wheelbase chassis. The bed mounts separately from the M939 cab and is designed to be used with the lowered version of the SCX10 iii M939 cab mounts.
Features and details included:
- Bed with battery access hatch and battery tray are included. A bed without a battery hatch is also included.
- Compartment with magnetic lid for spare screws
- Scale fuel tank with fuel tank holding brackets
- Rear sideboard can open for easier cargo loading (the sides do not open)
- Functional hooks to strap down cargo
- Fully functional light buckets
- Intricate details and more!
Printing tip: If layer steps appear too big on parts, orientate them so they are slightly angled in the slicer before printing.
Be sure to check out the instruction manual and gather all required hardware for assembly.
It is highly recommended to read the instruction manual before purchasing, to ensure you have all the required tools and hardware to assemble this body.
All files are for personal use only. DO NOT in any way redistribute, sell in physical or digital form, or use for AI purposes. Files are embedded with trademarks. Violations will result in immediate action without exception.
Assembly instructions:View the link below to download the assembly instructionshttps://www.aheadrc.com/manual
FDM printing:PETG filament0.2 layer heights30-70% infill densitySupports are necessary
STL (Stereolithography, filesize: 9.9 MB), PNG (PNG, filesize: 9.9 MB), PDF (PDF, filesize: 9.9 MB)
