Printer minimum build volume required - 130*185*140mm
All inner fenders need to be removed before installing. If your shock towers are integrated with the inner fenders, aftermarket front shock towers are required. It is also recommended to mount the battery at the front of the chassis rails under the bonnet for direct and easy access.**The sideboard flatbed is SOLD SEPARATELY.**
The M939 is an iconic 5 ton military truck seen in many movies and films. Widely known for its offroad ability and heavy duty hauling over rough terrain, these traits are translated into this RC body shell.
The M939 Cab is best matched with a tyre to tyre width of 240mm for best capability and clearance over gnarly terrain, although the fenders are 220mm wide. It is also designed to be paired with 120mm diameter tyres, though a slightly smaller one could give a slightly more scale realistic look.
Body mounts for the SCX10 ii, SCX10 iii, VS4-10 PRO, TRX4 / TRX6, are included. Lowered mounts are also included which will allow the cab to sit 8mm lower for improved center of gravity and ride height, at the cost of belly and fender clearance. The lowered mounts have only been tested for the TRX4 / TRX6 platform.
Features and details included:
- Dashboard, steering wheel and steering column
- Wipers and mirrors
- Angled exhaust also seen in real life counterpart
- Realistic snorkel
- Compartment with magnetic lid for spare screws
- Hinged doors and bonnet for easy battery access
- Fully functional light buckets
- Bonnet handles
- Intricate details and more!
Printing tip: If layer steps appear too big on parts, orientate them so they are slightly angled in the slicer before printing.
Be sure to check out the instruction manual and gather all required hardware for assembly.
It is highly recommended to read the instruction manual before purchasing, to ensure you have all the required tools and hardware to assemble this body.
.DXF window outline files are included with this body.
All of these files are for personal use only. DO NOT in any way redistribute, sell in physical or digital form, or use for AI purposes. Files are embedded with trademarks. Violations will be reported without exception.
Assembly instructions:View the link below to download the assembly instructionshttps://www.aheadrc.com/manual
FDM printing:PETG filament0.2 layer heights30-70% infill densitySupports are necessary
STL (Stereolithography, filesize: 27.3 MB), DXF (DXF, filesize: 27.3 MB), PDF (PDF, filesize: 27.3 MB)
