Printer minimum build volume required - 180*240*180mmSideboard flatbed sold separatelyBODY MOUNTS NOT INCLUDED
All inner fenders need to be removed before installing. If your shock towers are integrated with the inner fenders, aftermarket front shock towers are required.
The U452 cab is made to be paired with the U452 sideboard flatbed (sold separately).
Similar to the U452 “Loaf”, the cab is ideally matched with a chassis with a width of 235mm outer tyre to tyre, using 100mm - 105mm tyres.
To use this cab as a standalone or with the matching flatbed, it is recommended to use a low profile type transmission.
Body mounts are NOT INCLUDED, this is due to the cab being bolted directly onto the flatbed’s chassis mounts and front sideboard. Therefore using the cab as a standalone would require custom fabricated mounts.
Features and details included:Dashboard, steering wheel and steering columnWipers and mirrorsCab front air vent can be openedHinged doors for easy battery accessFully functional light buckets3 styles of front bumpers290mm, 313mm, 324mm wheelbases are all compatible.
Screenshots of recommended printing orientation for roof and cab flap are included.
Be sure to check out the instruction manual and gather all required hardware for assembly.
It is highly recommended to read the instruction manual before purchasing, to ensure you have all the required tools and hardware to assemble this body.
.DXF window outline files are included with this body.Assembly instructions:View the link below to download the assembly instructionshttps://www.aheadrc.com/manual
All of these files are for personal use only. DO NOT in any way redistribute, sell in physical or digital form, or use for AI purposes.
FDM printing:PLA+ or PETG filament0.2 layer heights30-70% infill densitySupports are necessary
STL (Stereolithography, filesize: 27.6 MB), PDF (PDF, filesize: 27.6 MB), PNG (PNG, filesize: 27.6 MB), DXF (DXF, filesize: 27.6 MB)
