Dark Trooper Phase Zero 3D print model

$30

License: Editorial No Ai

author:

SeriyPes

All content related to this 3D asset—including renders, descriptions, and metadata — is credited to its original author, «SeriyPes». CGhub does not claim copyright ownership over the content used.

This is my version of the Darktrooper Phase Zero helmet from the Star Wars universe. The helmet is based on the classic Stormtrooper helmet design.

The helmet is designed for a medium sized head. The shape of the helmet is loose, so there should be no problems putting it on. There's plenty of room inside for soft padding.
The thickness of the helmet wall is 4 mm. This will allow you to change the size of the helmet up or down without losing strength.
Here is one version of the helmet - with an open visor and separate lenses 3 mm thick.For gluing them from the inside there is a small side 5 mm wide.
The main helmet is not divided into parts and is one model. You can divide it yourself based on your printer model, printing settings and experience.
I separated small parts such as filters, parts on the sides, etc. and placed them on a plane for ease of printing. But you can arrange them in any way that is convenient for you, there are no restrictions.
I'm assuming the helmet will be tilted forward a bit when putting it on. With this position of the helmet there will be a good view through the visor. In several screenshots I showed the angle of the helmet and the level of the eyes relative to the visor.

If you have questions or suggestions for modifications to this project, write me a message and I will try to help.