Buy Flexible Paving Mat 1-87 FDM 3D print model

Name: Flexible Paving Mat 1-87 FDM 3D print model
Brand: StablePrints
SKU: 932617
Price: 2.00 USD
Availability: InStock

License: Custom

author:

StablePrints

All content related to this 3D asset—including renders, descriptions, and metadata — is credited to its original author, «StablePrints». CGhub does not claim copyright ownership over the content used.

Scale: 1/87 (H0) Printing technique: FDM Printer size: small eg. Anycubic i3mega (200x200)Sizes of the matts (center element):Small: 57mm x 185mmMid: 84mm x 185mmBig: 110mm x 185mm

Each mat size is completed with two ends allowing you to finish the pattern evenly.
You can also multiply the mat elements to create any length.
You can scale the model 0.75 percent, but no more, because the printer nozzle is 0.4 mm in diameter, scaling more than 0.75 percent is unlikely to work. Remember to scale the X and Y dimensions while leaving the Z wipe unchanged.Note1: the mat should be painted with gray oxide primer or printed with marble filament (if you are going to use marble filament to print the model, remember to make sure the filament is matte!)Note2: the paving mat can be easily bent and cut with scissors or a scalpel