This ** high poly sculpted Gargoyle** is the ideal spooky decoration.The complete design is divided in multiple STL files for an easier print. All the pieces can be later be attached together to obtain the final form of the Gargoyle. Upon the default size of the files, the Gargoyle has a length of 40cm from the right wing to the left wing (among the files you will be able to find an alternative printing option for the wings, each one divided in half to reduce the printing volume). Once printed, every part can be attached by applying glue in the connecting areas, just as it was done in one of the attached images.If the file’s default size is too big, it is possible to scale it to a smaller size.This is a high poly design. It is not ** recommended to use it for animation purposes. It is a **print ready file , there are no inside faces to worry about.The base refers to the top of the window of a ruined church. Has designated areas to stick the siting Gargoyle on. Once the whole design has been printed and attached together, the base is capable of resting on a flat surface or hang on a wall (wings will not affect neither scenario).Please watch the attached video for further details.
Within the design, many of the physical features were primarily based on the know Gothic Gargoyles. But rather than sticking with their usual stand, it was decided to apply a more demonic and empowered body pose to highlight its presence in the room.
Feel free to share any comments, suggestion, or questions regarding this design. Everything will be deeply appreciated.
*YMIR prints*
STL (Stereolithography, filesize: 59.9 MB)
