Goku Super Saiyan 4 - LED Lightbox NO AMS NEEDED Free 3D print model

free

License: Royalty Free No Ai

author:

ACSpark3D

All content related to this 3D asset—including renders, descriptions, and metadata — is credited to its original author, «ACSpark3D». CGhub does not claim copyright ownership over the content used.

Goku Super Saiyan 4 - Printing Instructions Included

Giving out a freebie for you guys to try!

All the necessary printing instructions are included in the file.If you have any questions, feel free to DM me!

You will need a 1mm thick glass layer or any transparent material of your choice.Also, make sure to have a strip light of your choice for the lighting.

Assembly As shown in the photos above but also numbered on the STL Files

For Commercial Use & More : https://www.patreon.com/c/ACSPARK3D

Enjoy showcasing your Goku Super Saiyan 4! - LED Lightbox

LightBox Frame Settings:Layer Height: 0.2Walls: 2Bottom: 2 (Or 3 to hide infil lines)Top: 215% Infil

LightBox Back Plate Settigns:Layer Height: 0.2Walls: 2Bottom: 3Top: 310% Infil

LightBox Transparent Layer:Layer Height: 0.2Walls: 2Bottom: 2Top: 21% Infil

Design Layer Settings:Layer Height: 0.22 Walls2 Top/Bottom3% InfilNo supports.