This cage is only compatible with the GoPro Hero 11
This GoPro Hero 11 cage features two cold shoe mounts (external microphone/light) and removable back/battery doors. I provided two versions of the battery door, one vented and one non-vented. You will need to pop off the original GoPro battery door when using this housing. So make note, your GoPro is NO LONGER WATERPROOF! This setup allows you to add an external microphone connected to GoPro's offical audio adapter (inserted inside the slot just below where the GoPro sits). All buttons are easily accessible and the battery can be easily removed via the battery door. You do not need to take the GoPro out of the entire housing. The cage and all the doors are included as separate .stl files to import into your slicer. I printed mine (photos included here) using an Elegoo Mars 2 Pro. Depending on resin type/shrinkage some light sanding will likely be needed for the doors to slide in to your liking. Strength of the cage is dependent on the resin type/filament you end up using. I printed mine using an ABS-like resin, nice strength and flexibility (for the doors).
F3D (Autodesk Fusion 360, filesize: 2.74 MB), OBJ (OBJ, filesize: 503 KB), FBX (Autodesk FBX, filesize: 215 KB), USDZ (USDZ, filesize: 141 KB), STL (Stereolithography, filesize: 754 KB), 3MF (3D Manufacturing File, filesize: 179 KB), STP (STEP, filesize: 437 KB), IAM (Autodesk Inventor, filesize: 339 KB), SKP (Sketchup, filesize: 340 KB)
