This needs to be printed on an SLA printer due to the tolerances!
Uses the following parts from AliExpress:
- 1200 RPM Planetary Geared DC motor
- 100mAh 3.7V LiPo battery
- 1.7G micro servo
- 2.4 GHz Micro receiver that is compatible with your transmitter (with built-in, or external ESC)
- 4x1.2x1.5mm ball bearings (4OD, 1.2 thickness, 1.5ID)
You'll need a 1.5mm rod for the rear axle and some superglue to fix the gear and wheels on it.
For the front right wheel hub, you need to mirror the left one when slicing.