Light up your room with this awesome mini street lamp.
To assemble the lamp, please add a few drops of super glue between the Base_Bottom and lamp files. The Lid_Top should be removable, so you can add the light source (I suggest electric candles) inside the lamp.
Note: Just a friendly reminder, but the STL files are not colored. The cover image is just a concept for the final design, but this will also allow you to choose whatever color you want to match your room decoration.
Disclaimer:
The idea behind this lamp is to add a light source to get the full effect, however, please DO NOT use real candles due to fire hazards.
As a safer alternative, use electric candles instead, as they will provide the same aesthetic results.
The assembled lamp dimensions are the following (mm):
Height- 346
Width- 150
Depth- 131
Sculpting software used: Blender
Render method used for the previews: Cycles
Filament: PLA
Slicer used to 3D print: Ultimaker Cura
Settings I've used to 3D print:
Standard quality - 0.2mm
Infill - This is a 3 piece item. However, I suggest having a higher infill for the Base_Bottom part. This will increase it's weight and improve the lamp's stability.
Supports - No supports should be needed.
Speed - 50% first 20 layers and 100% for the rest
Plate Adhesion - Skirt
Cooling - Enabled
Travel - Retraction Enabled
STL (Stereolithography, filesize: 43.5 MB), OBJ (OBJ, filesize: 69.9 MB), FBX (Autodesk FBX, filesize: 17.1 MB)
