Buy Mother of all bins multipplication bin 3D print model

Name: Mother of all bins multipplication bin 3D print model
Brand: futurum3d
SKU: 620449
Price: 5.00 USD
Availability: InStock

License: Editorial No Ai

author:

futurum3d

All content related to this 3D asset—including renders, descriptions, and metadata — is credited to its original author, «futurum3d». CGhub does not claim copyright ownership over the content used.

This is the mother of all bins !

Works in multiple aplications .Has 3 sizes , short , medium or tall !Can be attached to a desk , table or shelf .Can be hanged from a cabinet door , drawer .Can be screwed on to anything . -With the removable rim and lid assembly , it allows for a plastic bag to be installed and kept in place ! -Very easy to print , you can use the biggest res you have available and go as fast as you can extrude !

As said above , you can print in any resolution , and as fast as you can !

All the printing times below were sliced at .32mm , 3 walls and at 125mm/s !

-Short Bin 7 hours and 36 minutes .-Medium Bin 9 hours and 51 minutes .-Tall Bin 11 hours and 39 minutes .-Lid 3 hours and 29 minutes .-Rim 1 hour and 15 minutes .

Still .32mm but with 50% infill and 80mm/s .

-Clamp body 1 hour and 21 minutes ( Has a tiny support built in , right on the attachment point , just pry it off or cut it , no further work required).-25mm Hanger 21 minutes .-18mm Hanger 20 minutes .-15mm Hanger 20 minutes .

At .2mm 50% infill .

-2 Bolts 1 hour and 20 minutes .-2 Lid Arm 20 minutes .-2 Clamp Slotted Nut 10 minutes .

3D Model details

cgtrader Platform
Animated
Rigged
Ready for 3D Printing
VR / AR / Low-poly
PBR
Textures
Materials
UV Mapping
Polygons: 0
Vertices: 0
Geometry: Manifold geometry | No N-gons |

Tags

Cabinet Interior Shelf Table Storage Bin Garbage Desk Office Drawer Furniture Acessorie Gardget Gaming Minimal Minimalistic Slim Easy Print Supportless House Other Easy print

Similar models