Panther Chameleon - Furcifer pardalis NosyBe with Tongue ShotWall-Mountable3D ModelHigh-Polygon
Split and complete versions as a standing branch and as a branch that can be mounted on the wall.
The model is designed so that the chameleon (approximately 85 cm high) can be interchanged between the branches without requiring any further adjustments.
Included in the model (see image) are 4 small pins used for the mounting connections. These allow the chameleon to be securely attached to the branch and, if desired, glued for extra stability.
**Files for the split version:**Tree-Stand-CUT9.stlTree-Stand-CUT8.stlTree-Stand-CUT7.stlTree-Stand-CUT6.stlTree-Stand-CUT5.stlTree-Stand-CUT4.stlTree-Stand-CUT3.stlTree-Stand-CUT2.stlTree-Stand-CUT1.stlPIN_Feet_Right_Front_CUT.stlPIN_Feet_Right_Back_CUT.stlPIN_Feet_Left_Front_CUT.stlPIN_Feet_Left_Back_CUT.stlGrasshopper_CUT-Head_Bigger.stlGrasshopper_CUT-Head.stlGrasshopper_CUT-Body.stlGrasshopper.stlFurcifer-Pardalis-Shoot-V2-CUT-Tongue-Magnet-1.stlFurcifer-Pardalis-Shoot-V2-CUT-Tongue-1.stlFurcifer-Pardalis-Shoot-V2-CUT-Tail-7.stlFurcifer-Pardalis-Shoot-V2-CUT-Leg2-Front-5.stlFurcifer-Pardalis-Shoot-V2-CUT-Leg1-Front-4.stlFurcifer-Pardalis-Shoot-V2-CUT-Head-2.stlFurcifer-Pardalis-Shoot-V2-CUT-Body-Front-3.stlFurcifer-Pardalis-Shoot-V2-CUT-Body-Back-6.stlFiles for the split branch for wall mounting:
PIN_Feet_Left_Back.stlPIN_Feet_Left_Front.stlPIN_Feet_Right_Back.stlPIN_Feet_Right_Front.stlTree-Wall-CUT1.stlTree-Wall-CUT2.stlTree-Wall-CUT3.stlTree-Wall-CUT4.stlTree-Wall-CUT5.stlTree-Wall-CUT6.stlTree-Wall-CUT7.stlThe tongue and the grasshopper can be fitted with a magnet, allowing the food to be swapped out.
Here is a short video of the other Furcifer pardalis model.
These files are available under the Royalty-Free License. This means that printed or otherwise created versions of this model may not be used or sold for commercial purposes.
Sharing the STL files is not permitted.
Watermarks and Modifications:The original STL file and any modified versions may not be altered or sold, as they are protected with a digital, invisible watermark.
If you wish to request changes to the model, please contact the designer, Bernhard Queißer, from QU3D in Germany. He is open to discussions and will gladly address your modification requests.
Design + Copyright: Bernhard QueißerQU3D.deCountry of Origin: Germany
