Rogal Door Battle Tank for Battlemace 40 million Astral Guard army. The tank was inspired by a Rogal Dorn battle tank, that has not been released as of writing this - therefore the exact measurments might be off by a couple of milimeters - i will most likely update it to fit the exact dimensions later on and simply add/modify the files. Each part has a redundant geometry feature(s) located in normally non-visible areas that allow for painless assembly, if printed right. The sponson weapon slots and sponson weapons were made to be compatible with parts made by other modelers/companies.
DISCLAIMER - Tank on the photos is without tracks not because they are not included, but because putting them on in a simulation proved to be nigh impossible. I will submit photos of the assembled model once it's ready.
As of now, the files contain:
Tank parts:
- Hull
- 1 Side with a sponson slot (mirror it in slicer to get a second part)
- 2 Sponsons
- Tracks of various lengths (1-6 link long) (mirror them in slicer to get tracks for the second side)
- Turret (hatches closed)
Weapons:
- Oppressive cannon
- Twin combat cannons
- Pintle stubgun
- Hull gatling gun
- Hull powderiser cannon
- Front stubgun
- Front melter gun
- Sponson Heavy nailer
- Sponson Multi melter
- Side panels
- Sponsonless sides
- Frontal caps (no front weapons version)
Coming soon:
Edit: It took me a while, but here is the update. It contains Sponsonless Sides, Wheel guards, Frontal caps and Twin combat cannon. Enjoy!Edit 2: I just realized how badly designed for printing was the pillar in the turret that connected it with the main hull. I replaced it with a better solution - a Turret an a Turret pillar.
Model parts are not presupported.
These models were inspired by models made by Games Workshop. I am the author of these 3d models and I own them. You are not allowed to spread them without my permission, nor profit from them.
STL (Stereolithography, filesize: 72.1 MB)
