ROLLS-0042 SJ Litt Eaos Gondola freight car in H0-scale 3D print model

Publication date: 2023-11-27

ROLLS-0042 SJ Litt Eaos Gondola freight car in H0-scale 3D print model

$11

License: Editorial No Ai

author:

modelrailroad3d

All content related to this 3D asset—including renders, descriptions, and metadata — is credited to its original author, «modelrailroad3d». CGhub does not claim copyright ownership over the content used.

*** This 3D-set requires a minimum print surface length of 150mm of your resin 3D-printer***Full set of STL-files to build a Swedish state railroad freight car Litt Eaos in H0-scale. Runs well on both 2- and 3-rail systems.The car is equipped with standard sized NEM-pockets, which allows for any NEM-couplings of your choise.In addition you need: 4x wheel pairs (WHEEL DIAM: 10.3mm SHAFT LENGTH: 24.6mm)2x NEM springs (size 2.0mm diam, 4.0mm length, 0.1 - 0.2mm wire diameter)

Ready-to-print super detailed items set for H0-scale Model Railroad. The Print files (STL-format) with correct supports are included and all neccesary preparations are made to simplify print. Simply download, un-zip, slice and print. Enjoy!

The models are developed and test printed to verify function, detail and printability. Testing has been performed on a range of consumer grade 4k, 6k and 8k resin 3D-printers.

We recommend 0.03mm layer thickness and using one of the following resins for low warp, high strength and super detail:

Mix of 70% Anycubic ABS-like PLUS resin gray / 30% Anycubic Tough resin gray.

IMPORTANT GENERAL NOTE TO AVIOD WARPING / SCEWING:

WASHING: Wash all items clean from resin preferrably in a washing mashine 6-8 minutes (Anycubic Wash & Cure 2.0)
POST CURING: Leave all items to dry after wash properly. Preferrably over-night / 24h. All sides, including inside surfaces, MUST be exposed to the UV-light. Recommended time: 4 minutes.
Paint the details immidiatly after post-curing using a primer. We recommend TAMAIYA Surface Primer Fine Gray.

*The Editorial licence of course includes unlimited printing for your own Model Railroad. However, the 3D models provided in this set must NOT be used for commersial production or re-sale of the 3D-models.

3D Model details

cgtrader Platform
Animated
Rigged
Ready for 3D Printing
VR / AR / Low-poly
PBR
Textures
Materials
UV Mapping
Unwrapped UVs: Unknown
Geometry: Unknown
Polygons: 0
Vertices: 0

ROLLS-0042 SJ Litt Eaos Gondola freight car in H0-scale 3D print model

3D Model details

Tags

3D Models

3D Models

Info

Info