*** This 3D-set requires a minimum print surface length of 190x60mm of your resin 3D-printer***Full set of STL-files to build a Swedish State Railway Gondola type Ibr in H0-scale as per state 1963. Runs well on both 2- and 3-rail systems.This specific version with only un-loading doors has also the original boogies with journal boxes as an option. Boogies with roller bearings is provided as well.The car is equipped with standard sized NEM-pockets, which allows for any NEM-couplings of your choise.The car is designed to have ideal weight according to NEM-standard directly from print. This means the car runs well both empty and loaded with cargo.Set includes white decals in PDF-format for printing on laser or InkJET type printer using white cartridge.
In addition you need: 4x wheel pairs (WHEEL DIAM: 10.3mm SHAFT LENGTH: 24.6mm)2x NEM springs (size 2.0mm diam, 4.0mm length, 0.1 - 0.2mm wire diameter)
Ready-to-print super detailed items set for H0-scale Model Railroad. The Print files (STL-format) with correct supports are included and all neccesary preparations are made to simplify print. Simply download, un-zip, slice and print. Enjoy!
The models are developed and test printed to verify function, detail and printability. Testing has been performed on a range of consumer grade 4k, 6k and 8k resin 3D-printers.
We recommend 0.03mm layer thickness and using one of the following resins for low warp, high strength and super detail:
- Mix of 70% Anycubic ABS-like PLUS resin gray / 30% Anycubic Tough resin gray.
Use the following link for best price of your new Anycubic purchases: https://store.anycubic.com/?ref=zwjjfwob at the same time as you support the Modelrailroad3D design work.
IMPORTANT GENERAL NOTE TO AVIOD WARPING / SCEWING:
- WASHING: Wash all items clean from resin preferrably in a washing mashine 6-8 minutes (Anycubic Wash & Cure 2.0)
- POST CURING: Leave all items to dry after wash properly. Preferrably over-night / 24h. All sides, including inside surfaces, MUST be exposed to the UV-light. Recommended time: 4 minutes.
- Paint the details immidiatly after post-curing using a primer. We recommend TAMAIYA Surface Primer Fine Gray.
*The Editorial licence of course includes unlimited printing for your own Model Railroad. However, the 3D models provided in this set must NOT be used for commersial production or re-sale of the 3D-models.
STL (Stereolithography, filesize: 71.9 MB), OTHER (Other, filesize: 565 Bytes), PNG (PNG, filesize: 71.9 MB), PDF (PDF, filesize: 71.9 MB)
