Single Lane Slot Car Track System Free 3D print model

free

License: Royalty Free No Ai

author:

johnny-s-workshop

All content related to this 3D asset—including renders, descriptions, and metadata — is credited to its original author, «johnny-s-workshop». CGhub does not claim copyright ownership over the content used.

You are looking at a single lane track system I am currently developing.For test/rally/drag strip/hillclimb track, you name it!

This bundle is FREE to download!Will expand on add-ons later on.

Easy to print, braid and assemble. All track pieces will fit on small size 3D printers (220 x 220).Track is wide enough to not need any extra border pieces and potentially wide enough for small 1/24 cars like the Shelby Cobra in one of the pictures.

Tracks are 153 mm wide, 7.6 mm deep slot, 6.5 mm track braid wide.

I would advise to lay a single strip of track-braid once you've committed to a layout.Alternatively, you could do as I did by making brass 'jumpers' or 'tabs' and secure them in place (2 mm holes present), just as showing on picture.

Note: Some of the pieces will get updated along the way, but the old ones will be compatible with new ones.

Johnny's Workshop