Smiling Water Droplet 3D print model

License: Royalty Free

author:

uploadermodel

All content related to this 3D asset—including renders, descriptions, and metadata — is credited to its original author, «uploadermodel». CGhub does not claim copyright ownership over the content used.

A teardrop-shaped water droplet character with tiny feet and a happy expression. The smooth continuous surface and wide base keep it easy to print and very resistant to tipping.

SETTINGS & INSTRUCTIONS:• Intended as a decorative, non-functional model.• Print as a single solid piece.• Max size: scale so the longest dimension is 25 cm or less.• Recommended material: PLA (PETG also works).• Layer height: 0.16–0.20 mm.• Infill: 10–20% (higher infill for heavier feel).• Shells/walls: 2–3 perimeters.• Supports: Generally not required. Enable only if your slicer flags problem overhangs.• Bed adhesion: Skirt or small brim if needed.• After print: optional light sanding and painting/clear coat.