Tanjiro Kamado 3D print model

License: Content published with the label may not be sold, given, or assigned to another person or entity in the form it is downloaded from the site.

author:

ArturoLJG25

All content related to this 3D asset—including renders, descriptions, and metadata — is credited to its original author, «ArturoLJG25». CGhub does not claim copyright ownership over the content used.

Tanjiro Kamado

Direct from Kimetsu No Yaiba; Tanjiro.A nice picture, easy to print, with a fixed base and printable parts that you can paint (or print in color) and then glue to the fixed base.All parts are easy to print.All parts have a tolerance of: 0.3 mm. You can print the base and one of the small parts (an earring, for example) to adjust the tolerance if necessary, with 0.3 mm should not be a problem.

Once the whole picture is built, it can be glued on a wall with double-sided tape.

Layer - 0.2 mmSpeed - 50 mm/sWithout supportsFilling - 20%Temperature 205 degrees and bed 70 degrees