The Simpsons House 3D print model

License: Editorial No Ai

author:

blitxz

All content related to this 3D asset—including renders, descriptions, and metadata — is credited to its original author, «blitxz». CGhub does not claim copyright ownership over the content used.

The Simpsons house! 3D print house model of the most popular family on television! Model faithful to the original design. Articulated doors (front, back and garage) and removable roof

The project has small parts, before you start printing make sure your 3D printer is well calibrated, especially in relation to extrusion factor.

Use PLA for all parts.

The project does not require supports via software.

Windows and door frames have supports incorporated in STL, and can be identified by a tab added to the support to facilitate removal.

Minimum bed size 20x20x10, and maximum nozzle diameter is 0.4mm

Printing the windows.0.18 layer heightSpeed between 20 and 40 mm/s

Printing the bay windowsKeep this piece rotated 45 ° on the table0.18 layer hightSpeed between 20 and 40 mm / s

Printing doors0.18 layer hightSpeed between 20 and 40 mm / s

Printing hinges0.18 layer hight 2xSpeed between 20 and 40 mm / s

Printing the roof0.2 layer hight (or less if you prefer)Speed between 40 and 60 mm / s

Printing wallsBetween 0.2 and 0.3 layer hightSpeed between 40 and 60 mm / s

Attention! You can print all windows together, but will get better results if you print each one individually.Print necessarily all small parts with a layer height of 0.18 mm (no more or less) to ensure the removal of the supports easily

3D Model details

cgtrader Platform
Animated
Rigged
Ready for 3D Printing
VR / AR / Low-poly
PBR
Textures
Materials
UV Mapping
Polygons: 0
Vertices: 0
Geometry: Manifold geometry | No N-gons |

Tags

Scale Model Simpsons House Springfield Miniatures Architectural Balance Measure Kg Modernist Weight Residential building Justice City scraper Architecture

Similar models