Buy Train Bookmark 3D print model

Name: Train Bookmark 3D print model
Brand: crosslances
SKU: 933186
Price: 4.00 USD
Availability: InStock

License: Custom No Ai

author:

crosslances

All content related to this 3D asset—including renders, descriptions, and metadata — is credited to its original author, «crosslances». CGhub does not claim copyright ownership over the content used.

All bookmarks can be printed in one piece flat directly on the printing plate.The only exception is the mimic bookmark, which consists of two pieces to be glued together.

The tab can present some critical issues depending on the filament and infill and the number of walls you use in printing.you need to find a good compromise between flexibility and strength.In case it turns out to be too fragile or flexible our advice is to slightly scale the object in its entirety to 110-120%.In the opposite case where it turns out to be too stiff, our suggestion is to slightly lower (0.1-0.5 mm) the object under the printing plate to thin the tab, without scaling so as not to lose too much detail.For any needs crosslances remains at your service.