Trosky Castle Terrain Pieces Layer A Extension 1 to 400 Free 3D print model

Name: Trosky Castle Terrain Pieces Layer A Extension 1 to 400 Free 3D print model
Brand: engisan
SKU: 746000
Availability: InStock

free

License: Royalty Free No Ai

author:

engisan

All content related to this 3D asset—including renders, descriptions, and metadata — is credited to its original author, «engisan». CGhub does not claim copyright ownership over the content used.

Optional terrain extension (A36–A42) for the Trosky Castle Layer A base. Designed in 1 to 400 scale, these parts add the outer terrain around the main foundation. Intended as an add-on to the terrain base (Layer A) and upper stronghold (Layers B & C).

OverviewThis package provides the optional terrain blocks A36–A42 from Layer A of the Trosky Castle reconstruction.These pieces represent additional ground and slopes surrounding the main foundation. They are not structurally necessary, but when assembled they give the castle a broader and more realistic landscape footprint.

Note: These parts are an extension only. To build a complete castle model, you need:Upper Stronghold (Layers B & C)Layer A Terrain Base (core 12-part foundation)This set adds the optional outer terrain.

Features:Scale: 1 to 400Parts included: 4 blocks (A36–A42, some are connected into two)Formats: STLDesigned for FDM and resin printingSame engraving system as the rest of Layer A (indices A36–A42)

Assembly Information:These pieces attach around the edges of Layer A.Engraved numbers (A36–A42) ensure correct orientation.You can leave them out if you prefer a smaller, compact base.Dry-fit first to confirm alignment with the main Layer A base.

Compatibility:Works only as an extension to Layer A terrain base and the Upper Stronghold (Layers B & C).Expands the model into a full 67 × 57 × 11 cm footprint.