this is the uss Missouri battleship RC for 3d print
the model is separated into a part
shaft hole diameter is 9 mm, you can use 8 mm diameter propeller shaftyou need bolt M2.5 /2 mmship dimension : length : 119 cm widht : 14.5 cm
i designed it to suitable for fdm printer but there are some part that need little attention because of the detail
there is no error in cura or pruca slicer
included image of model part and position
shaft recomendation is 8 mm width and 15 or 20 cm length, bolt m 2.5 mmready to print
STL (Stereolithography, filesize: 25.3 MB), PNG (PNG, filesize: 12.6 MB)