Buy USS San Pablo - The Sand Pebbles - RC Model 1-48 3D print model

Name: USS San Pablo - The Sand Pebbles - RC Model 1-48 3D print model
Brand: ZacksModelShipyard
SKU: 858432
Price: 25.00 USD
Availability: InStock

$25

License: Royalty Free

author:

ZacksModelShipyard

All content related to this 3D asset—including renders, descriptions, and metadata — is credited to its original author, «ZacksModelShipyard». CGhub does not claim copyright ownership over the content used.

This 1/48 scale model is based on the fictional US Navy river gunboat “USS San Pablo” from the movie “The Sand Pebbles.” It is a 1920’s era steam (or “stim”) river boat that was serving in China. As a head’s up, I initially modeled this at 1/96 scale, but decided to double it at the end to 1/48. I normally make my hull thickness around 2mm, but because of the increase at the end it will be thicker. (However if you scale it down, your thickness should still be good to print and not too thin/brittle!) You will also notice that I left off the handrails and canvas covers. These would be very small and (in the case of the canvas covers) difficult for me to design, so I’ll leave those details in the hands of you skilled modelers out there!

I tried to keep all pieces under 250mm for printing. Some slicing may be required though.

At 1/48 scale, this model is about 950mm long, 158mm wide, and 450mm tall.

Due to website restrictions on naming conventions, some of the file names may not match up perfectly with the original list in the instruction booklet. The numbers will still match though.

Edit 1 (1/27/26): I had few requests for a stand, so I whipped one up real quick and added it in. Remember that the F and A for foreward and aft go towards the inside.