VW MK3 Steering column 2nd Gen. Trim Cover (28 mm ignition / With height adjustment) Replacement Kit
A complete 3D-printable replacement for the increasingly hard-to-find VW Golf/Jetta MK3 steering column trim cover for height-adjustable steering columns (2nd Gen., 28 mm ignition). Designed to maintain the OEM exterior look while offering improved printability, durability, and compatibility.
- Key Features:
Supports 28 mm ignition diameter (2nd Generation).
Includes top and bottom trim pieces.
Compatible with OEM references:Top: 1H0 953 515 L 01CBottom (Airbag versions): 1H0 953 516 AE 01C ; 1H0 953 516 AC 01C
Improved, reinforced geometry while keeping OEM exterior shape.
Designed for FDM 3D printing with minimal issues.
Uses M5 heat-set inserts (length 6 mm, outer Ø 7 mm).
Requires 3 × M5 hex screws, length 35–50 mm.
Update Log15/04/2024
- Adjusted lever-clearance geometry
- Updated ignition appearance (closer to OEM)
- Added replaceable mounting clip (separate print)
- Updated top-cover orientation to reduce support usage
20/11/2025 – V25.42
- Improved cavity for the replaceable mounting clip
- Tighter M5 heat-insert holes
- SUP versions optimized for tilted printing at the ideal angle
If you are looking for the ready-to-use physical part, visit: additivelegacyparts.com
- Recommended Materials:
For optimal durability, use ABS, ASA, or other UV-resistant materials.PETG can be used but is best for cold climates or garage-kept vehicles.
- Printing Tips:
Use the SUP versions with built-in optimized supports and automatic ideal orientation. Or use the unsupported versions if you prefer to apply your own support strategy and printing orientation.
- Need Help or Have Questions?
If you need help or run into printing issues, feel free to contact us:
Facebook: AdditiveLegacyParts
Instagram: @additivelegacyparts
We're always here to help. Happy Printing!
