Wilwood 6 Piston Capiler plus Disk or Rotor 3D print model

$31.52

License: Custom No Ai

author:

jrmaniaminishop

All content related to this 3D asset—including renders, descriptions, and metadata — is credited to its original author, «jrmaniaminishop». CGhub does not claim copyright ownership over the content used.

Generic disc/rotor and Wilwood 6 Piston caliper brake assembly. Separate files that can be printed at different scales. The files are in 1/24 scale.The logo and texts on the caliper are in low relief, making painting and detailing of the piece easier.For other scales you can use the scale table below:

1/64 - 37.5% (Not tested)1/32 - 75% (Not tested)1/25 - 96%1/24 - 100%1/18 - 133.3333%1/12 - 200%1/10 - 240%1/8 - 300%

You can print with a layer height of 50μm, if you want a higher level, with 40μm you will have a better result. Layers smaller than this will make no difference.I recommend printing the discs/rotors tilted at 45ºOther printing details depend on the resin you use and the printer, but do not require special care.