DISNEY HOUSE 3D print model

$14

License: Royalty Free

author:

PrintablesHub

All content related to this 3D asset—including renders, descriptions, and metadata — is credited to its original author, «PrintablesHub». CGhub does not claim copyright ownership over the content used.

3D MODEL DESCRIPTIONThis is a puzzle 3D model. In which there are roof, doors, some windows and some details, which makes a house.

The model I see in my hand was made in a few hours.Because I have made it in different pieces.

You can see the created item on youtube...https://youtu.be/CDLt6TB9jR4

If you have any questions feel free to ask.

Do you think I made a mistake or forgot something feel free to inform me :-)

3D PRINTING SETTINGSIt's hard to give an exact amount of material used, but I mostly used these settings for my printer:

0.4mm Nozzle0,2 mm resolution /layer Hight3 wall layers (but for smaller pieces like the windows 2 wall layers)infill 20%Skirt 3 linesSo then you should need around:

White PLA around 21 gram

Time....... I used mostly the settings:

print speed 50mm/swall speed 25mm/sinner wall 25mm/stop/bottom 25mm/stravel 150 mm/sinitial layer 25mm/s

Print support is required in almost all parts.

print support: ( roof, door and back wall.)

and that will take you to around 3 to4 hours :-) so fast...