Flowing Bird Feeder Free 3D print model

free

License: Custom No Ai License

author:

jobsmolders

All content related to this 3D asset—including renders, descriptions, and metadata — is credited to its original author, «jobsmolders». CGhub does not claim copyright ownership over the content used.

Description

This is a feeder for small Birds.inspired by flowing Waves.

It's intended to hang in the air so Birds feel more save.The opening in the middle of the “base” is an attempt to let rainwater out.

This Feeder is printed in PLA at 0.2mm resolution with 0.4mm nozzle. The roof.stl is printed with support material. After that I Super Glued the parts together. See the pictures to see how the parts come together. I first glued the “base” parts. Then the “roof” & “wedge” parts. I also glued the M4x45mm bolt in place already, because later on it will be difficult to do this. As the last step, glue the “roof” , “base” and all the white parts together.

Needed parts:

1X M4x45mm bolt and nut6X base.stl6X entrance.stl2X mount pin.stl1X mount ring.stl1X mount wedge.stl2X mount.stl6X pillar 2L.stl6X pillar 2R.stl6X pillar.stl6X roof,stl

If you have any questions, feel free to ask :-)