Lord Marshal Helmet - Chronicles of Riddick 3D print model

$35

License: Royalty Free

author:

dogbite-junk

All content related to this 3D asset—including renders, descriptions, and metadata — is credited to its original author, «dogbite-junk». CGhub does not claim copyright ownership over the content used.

The leader of the Necromonger army in The Chronicles of Riddick (franchise) universe.

i printed the helmet on my prusa mk3, so i had to slice it to several parts.i printed all the models with a 1.5 layer height and supports on for most of the prints.my finishing work isnt stellar and some parts wee glued using super glue on an offset, thus leaving a small gap.

the print is two parts, the helmet and the faceplate.there are holes to put in magnets so that the faceplate can be magnetically attached.

the helmet is scaled to a reasonable head size, when i printed this, it was 5 % smaller than the files im publishing so it didnt fit on my large head.

I am Attaching the full model files as well as the files i sliced, you might want to slice these files yourself as my seams might have worked for me, but not for you.

you have 3 options for the print

use the full model, Helmet_LordMarshal.stl and FacePlate_LordMarshal.stl2.use the sliced files, the ones with the _Slice and the FacePlate_LordMarshal.stl.
slice the Helmet_LordMarshal.stl in netfab basic( discontinued software, but you can still get it online), or meshmixer which are free software.

slicing in meshmixer - https://www.youtube.com/watch?v=Tgc66TvEke4slicing in netfab - https://www.youtube.com/watch?v=bZ2azHjCaHE