(The truck cab is sold separately)
Aftermarket shock towers may be required. All inner fenders need to be removed before installing.
PLEASE make sure your 3D printer is able to print a minimum size of 180x235x205mm. before purchasing.
UPDATE: Includes TRX6 compatibility fixes. Thanks to a fellow TRX6 builder for sharing these improvements!
Designed specifically for the Cat 1 “Mammoth” truck cab, this one is for those who are planning to build a 6x6 Cat 1. If you haven’t seen the 4x4 Cat 1 Expedition build yet, you should check it out here:https://www.aheadrc.com/custom-builds
The Cat 1 6x6 Expedition Cab is an addon attachment for the Crawler Cat 1 “Mammoth”. (The truck cab is sold separately)
The wheelbase matches the TRX6 (G63) chassis at 324 - 454mm. Full body mounts are also provided for the TRX6 (G63) platform.
.STEP files for the mounts are also included for use with custom chassis, or custom configurations.
Assembly instructions:View the link below to download the assembly instructions (same instruction manual as the “Crawler Cat 1 Expedition Cab”. Steps are slightly different but are easy to understand. Feel free to contact us if you find the instructions unclear.)https://www.aheadrc.com/manual
DXF files for the windows are also included.
It is highly recommended to read the instruction manual before purchasing, to ensure you have all the required tools and hardware to assemble this body.
Should you need any help, please do not hesitate to contact us!
FDM printing:
Requires a printer that can print a minimum volume of: 180x235x205mm.
PLA+ filament0.3mm-0.4mm (0.6mm nozzle) layer heights20-30% infill densitySupports are necessaryPrint cab body vertically for less supports
Finished and assembled size:440*266*175mm (All parts assembled)
STL (Stereolithography, filesize: 21.2 MB), MAX (Autodesk 3ds Max, filesize: 21.5 MB), PDF (PDF, filesize: 21.2 MB), DXF (DXF, filesize: 21.2 MB)
